Body plethysmography Pulmonology

To meet Wikipedia's quality standards, this article or section may require cleanup.
See rationale on the talk page, or replace this tag with a more specific message. Editing helpis available.
(Tagged January 2006)

To meet Wikipedia's quality standardsand make it more accessible to a general audience, this article may require cleanup.
The introduction to this article provides insufficient context for those unfamiliar with the subject matter. Please help Wikipedia by improving the introduction according to the guidelines laid out at Wikipedia:Guide to layout. You can discuss the issue on the talk page.

This article or section contains information that has not been verified and thus might not be reliable. If you are familiar with the subject matter, please check for inaccuracies and modify as needed, citing sources.

Body plethysmography is a method of obtaining the absolute volumeof airwithin one's lungs. It is used in situations where several repeated trials are required or where the patient is unable to perform the multibreath tests.

The patient is enclosed in an airtight chamber often referred to as a body box; a pneumotachometeris used to measure airflow while a mouth pressure transducer with a shutter measures the alveolar pressure. The most common measurements made using body plethysmographs are thoracic gasvolume (VTG) and airway resistance(RAW). This test is used mainly in the Pulmonary Function Testing laboratories.

Using body plethysmography, doctors can examine the lungs' resistance to airflow, distinguish between restrictive and obstructive lung diseases, determine the response to bronchodilators, and determine bronchial hyperreactivityin response to metacholine, histamine, or isocapnic hyperventilation.

Flow and Pressure Plethysmographs

There are two types of plethysmographs: flow and pressure. In flow plethysmography, airway resistance is measured by two maneuvers. The patient first pants while the mouth shutter is open to allow flow changes to be measured. Then, the mouth shutter closes at the patient's end expiratory or FRC level and the patient continues panting while maintaining an open glottis. This provides a measure of the driving pressure used to move air into the lungs.

Pressure plethysmographs are usually measured at the end-expiratory level and are then equal to FRC. The patient sits in the box, which has the pressure transducer in the wall of the device, and breathes through a mouthpiece connected to a device that contains an electronic shutter and a differential pressure pneumotachometer. The mouth pressure and box pressure changes that are measured during tidal breathing and panting maneuvers which are performed during the test by the patient at the end of expiration are sent to a microprocessor unit that calculates thoracic gas volume.

Categories: Cleanup from January 2006| Wikipedia articles needing context| Wikipedia articles needing factual verification| Pulmonology

This article is licensed under the GNU Free Documentation License.
It uses material from the http://en.wikipedia.org/wiki/Body+plethysmography Wikipedia article Body plethysmography.